Page Contents

loopback-connector-mysql

MySQL is a popular open-source relational database management system (RDBMS). The loopback-connector-mysql module provides the MySQL connector module for the LoopBack framework.

Installation

In your application root directory, enter this command to install the connector:

npm install loopback-connector-mysql --save

Note: Since loopback-connector-mysql v7.x.x, this MySQL connector has dropped support for MySQL 5.7 and requires MySQL 8.0+.

This installs the module from npm and adds it as a dependency to the application’s package.json file.

If you create a MySQL data source using the data source generator as described below, you don’t have to do this, since the generator will run npm install for you.

Creating a MySQL data source

For LoopBack 4 users, use the LoopBack 4 Command-line interface to generate a DataSource with MySQL connector to your LB4 application. Run lb4 datasource, it will prompt for configurations such as host, post, etc. that are required to connect to a MySQL database.

After setting it up, the configuration can be found under src/datasources/<DataSourceName>.datasource.ts, which would look like this:

const config = {
  name: 'db',
  connector: 'mysql',
  url: '',
  host: 'localhost',
  port: 3306,
  user: 'user',
  password: 'pass',
  database: 'testdb',
};
For LoopBack 3 users

Use the Data source generator to add a MySQL data source to your application.
The generator will prompt for the database server hostname, port, and other settings required to connect to a MySQL database. It will also run the npm install command above for you.

The entry in the application’s /server/datasources.json will look like this:

"mydb": {
  "name": "mydb",
  "connector": "mysql",
  "host": "myserver",
  "port": 3306,
  "database": "mydb",
  "password": "mypassword",
  "user": "admin"
 }

Edit <DataSourceName>.datasources.ts to add any other additional properties that you require.

Properties

Property Type Description
collation String Determines the charset for the connection. Default is utf8_general_ci.
connector String Connector name, either “loopback-connector-mysql” or “mysql”.
connectionLimit Number The maximum number of connections to create at once. Default is 10.
database String Database name
debug Boolean If true, turn on verbose mode to debug database queries and lifecycle.
host String Database host name
password String Password to connect to database
port Number Database TCP port
socketPath String The path to a unix domain socket to connect to. When used host and port are ignored.
supportBigNumbers Boolean Enable this option to deal with big numbers (BIGINT and DECIMAL columns) in the database. Default is false.
timeZone String The timezone used to store local dates. Default is ‘local’.
url String Connection URL of form mysql://user:password@host/db. Overrides other connection settings.
username String Username to connect to database
allowExtendedOperators Boolean Set to true to enable MySQL-specific operators such as match. Learn more in Extended operators below.

NOTE: In addition to these properties, you can use additional parameters supported by node-mysql.

Type mappings

See LoopBack 4 types (or LoopBack 3 types) for details on LoopBack’s data types.

LoopBack to MySQL types

LoopBack Type MySQL Type
String/JSON VARCHAR
Text TEXT
Number INT
Date DATETIME
Boolean TINYINT(1)
GeoPoint object POINT
Custom Enum type
(See Enum below)
ENUM

MySQL to LoopBack types

MySQL Type LoopBack Type
CHAR String
BIT(1)
CHAR(1)
TINYINT(1)
Boolean
VARCHAR
TINYTEXT
MEDIUMTEXT
LONGTEXT
TEXT
ENUM
SET
String
TINYBLOB
MEDIUMBLOB
LONGBLOB
BLOB
BINARY
VARBINARY
BIT
Node.js Buffer object
TINYINT
SMALLINT
INT
MEDIUMINT
YEAR
FLOAT
DOUBLE
NUMERIC
DECIMAL

Number
For FLOAT and DOUBLE, see Floating-point types.

For NUMERIC and DECIMAL, see Fixed-point exact value types

DATE
TIMESTAMP
DATETIME
Date

NOTE as of v3.0.0 of MySQL Connector, the following flags were introduced:

  • treatCHAR1AsString default false - treats CHAR(1) as a String instead of a Boolean
  • treatBIT1AsBit default true - treats BIT(1) as a Boolean instead of a Binary
  • treatTINYINT1AsTinyInt default true - treats TINYINT(1) as a Boolean instead of a Number

Data mapping properties

Except the common database-specific properties we introduce in How LoopBack Models Map To Database Tables/Collections, the following are more detailed examples and MySQL-specific settings.

Table/Column Names

Besides the basic LoopBack types, as we introduced above, you can also specify additional MySQL-specific properties for a LoopBack model. It would be mapped to the database.

Use the mysql.<property> in the model definition or the property definition to configure the table/column definition.

For example, the following settings would allow you to have custom table name (Custom_User) and column name (custom_id and custom_name). Such mapping is useful when you’d like to have different table/column names from the model:

user.model.ts

@model({
  settings: { mysql: { schema: 'testdb', table: 'Custom_User'} },
})
export class User extends Entity {
  @property({
    type: 'number',
    required: true,
    id: true,
    mysql: {
      columnName: 'custom_id',
    },
  })
  id: number;

  @property({
    type: 'string',
    mysql: {
      columnName: 'custom_name',
    },
  })
  name?: string;
For LoopBack 3 users
{
  "name": "User",
  "options": {
    "mysql": {
      "schema": "testdb",
      "table": "Custom_User"
    }
  },
  "properties": {
    "id": {
      "type": "Number",
      "required": true,
      "mysql": {
        "columnName": "custom_id",
      }
    },
    "name": {
      "type": "String",
      "mysql": {
        "columnName": "custom_name",
      }
    },
  }
}

Numeric Types

Except the names, you can also use the dataType column/property attribute to specify what MySQL column type to use. The following MySQL type-dataType combinations are supported:

  • number
  • integer
  • tinyint
  • smallint
  • mediumint
  • int
  • bigint
  • float
  • double
  • decimal

The following examples will be in LoopBack 4 style, but it’s the same if you provide mysql.<property> to the LB3 property definition.

Floating-point types

For Float and Double data types, use the precision and scale options to specify custom precision. Default is (16,8).

Example
@property({
  type: 'Number',
  mysql: {
    dataType: 'float',
    precision: 20,
    scale: 4
  }
})
price: Number;

Fixed-point exact value types

For Decimal and Numeric types, use the precision and scale options to specify custom precision. Default is (9,2). These aren’t likely to function as true fixed-point.

Example
@property({
  type: 'Number',
  mysql: {
    dataType: 'decimal',
    precision: 12,
    scale: 8
  }
})
price: Number;

Text types

Convert String / DataSource.Text / DataSource.JSON to the following MySQL types:

  • varchar
  • char
  • text
  • mediumtext
  • tinytext
  • longtext
Example
@property({
  type: 'String',
  mysql: {
    dataType: 'char',
    dataLength: 24 // limits the property length
  },
})
userName: String;

Dat types

Convert JSON Date types to datetime or timestamp.

Example
@property({
  type: 'Date',
  mysql: {
    dataType: 'timestamp',
  },
})
startTime: Date;

Enum

See the Model ENUM property for details.

Default Clause/Constant

Use the default and dataType properties to have MySQL handle setting column DEFAULT value.

Example
@property({
  type: 'String',
  mysql: {
    dataType: 'varchar',
    default: 'pending'
  }
})
status: String;

@property({
  type: 'Number',
  mysql: {
    dataType: 'int',
    default: 42
  }
})
maxDays: Number;

@property({
  type: 'boolean',
  mysql: {
    dataType: 'tinyint',
    default: 1
  }
})
isDone: Boolean;

For the date or timestamp types use CURRENT_TIMESTAMP or now.

Example
@property({
  type: 'Date',
  mysql: {
    dataType: 'datetime',
    default: 'CURRENT_TIMESTAMP'
  }
})
last_modified: Date;

NOTE: The following column types do NOT supported MySQL Default Values:

  • BLOB
  • TEXT
  • GEOMETRY
  • JSON

Extended operators

MySQL connector supports the following MySQL-specific operators:

  • match Please note extended operators are disabled by default, you must enable them at datasource level or model level by setting allowExtendedOperators to true.

    Operator match

    The match operator allows you to perform a full text search using the MATCH() .. AGAINST() operator in MySQL.

Three different modes of the MATCH clause are also available in the form of operators -

By default, the match operator works in Natural Language mode.

Note The fields you are querying must be setup with a FULLTEXT index to perform full text search on them. Assuming a model such as this:

@model({
  settings: {
    allowExtendedOperators: true,
  }
})
class Post {
  @property({
    type: 'string',
    mysql: {
      index: {
        kind: 'FULLTEXT'
      }
    },
  })
  content: string;
}

You can query the content field as follows:

const posts = await postRepository.find({
  where: {
    {
      content: {match: 'someString'},
    }
  }
});

Discovery and auto-migration

Model discovery

The MySQL connector supports model discovery that enables you to create LoopBack models based on an existing database schema. Once you defined your datasource:

Auto-migration

The MySQL connector also supports auto-migration that enables you to create a database schema from LoopBack models. For example, based on the following model, the auto-migration method would create/alter existing Customer table in the database. Table Customer would have two columns: name and id, where id is also the primary key that has auto_increment set as it has definition of type: 'Number' and generated: true:

@model()
export class Customer extends Entity {
  @property({
    id: true,
    type: 'Number',
    generated: true,
  })
  id: number;

  @property({
    type: 'string',
  })
  name: string;
}

Moreover, additional MySQL-specific properties mentioned in the Data mapping properties section work with auto-migration as well.

Auto-generated ids

For now LoopBack MySQL connector only supports auto-generated id (generated: true) for integer type as for MySQL, the default id type is integer. If you’d like to use other types such as string (uuid) as the id type, you can:

  • use uuid that is generated by your LB application by setting defaultFn: uuid.
  @property({
    id: true,
    type: 'string'
    defaultFn: 'uuidv4',
    // generated: true,  -> not needed
  })
  id: string;
  • Alter the table in your database to use a certain function if you prefer having the database to generate the value.
  @property({
    id: true,
    type: 'string'
    generated: true,  // to indicate the value generates by the db
    useDefaultIdType: false,  // needed
  })
  id: string;

Auto-migrate/Auto-update models with foreign keys

Foreign key constraints can be defined in the model definition.

Note: The order of table creation is important. A referenced table must exist before creating a foreign key constraint. The order can be specified using the optional SchemaMigrationOptions argument of migrateSchema:

await app.migrateSchema({
	models: [ 'Customer', 'Order' ]
});

Define your models and the foreign key constraints as follows:

customer.model.ts

@model()
export class Customer extends Entity {
  @property({
    id: true,
    type: 'Number',
    generated: true,
  })
  id: number;

  @property({
    type: 'string',
  })
  name: string;
}

order.model.ts:

@model({
  settings: {
    foreignKeys: {
      fk_order_customerId: {
        name: 'fk_order_customerId',
        entity: 'Customer',
        entityKey: 'id',
        foreignKey: 'customerId',
      },
    },
  })
export class Order extends Entity {
  @property({
    id: true,
    type: 'Number',
    generated: true
  })
  id: number;

  @property({
    type: 'string'
  })
  name: string;

  @property({
    type: 'Number'
  })
  customerId: number;
}
For LoopBack 3 users
({
  "name": "Customer",
  "options": {
    "idInjection": false
  },
  "properties": {
    "id": {
      "type": "Number",
      "id": 1
    },
    "name": {
      "type": "String",
      "required": false
    }
  }
},
{
  "name": "Order",
  "options": {
    "idInjection": false,
    "foreignKeys": {
      "fk_order_customerId": {
        "name": "fk_order_customerId",
        "entity": "Customer",
        "entityKey": "id",
        "foreignKey": "customerId"
      }
    }
  },
  "properties": {
    "id": {
      "type": "Number"
      "id": 1
    },
    "customerId": {
      "type": "Number"
    },
    "description": {
      "type": "String",
      "required": false
    }
  }
})

MySQL handles the foreign key integrity by the referential action specified by ON UPDATE and ON DELETE. You can specify which referential actions the foreign key follows in the model definition upon auto-migrate or auto-update operation. Both onDelete and onUpdate default to restrict.

Take the example we showed above, let’s add the referential action to the foreign key customerId:

@model({
  settings: {
    foreignKeys: {
      fk_order_customerId: {
        name: 'fk_order_customerId',
        entity: 'Customer',
        entityKey: 'id',
        foreignKey: 'customerId',
        onUpdate: 'restrict', // restrict|cascade|set null|no action|set default
        onDelete: 'cascade'   // restrict|cascade|set null|no action|set default
      },
    },
  })
export class Order extends Entity {
...
For LoopBack 3 users

model-definiton.json

{
  "name": "Customer",
  "options": {
    "idInjection": false
  },
  "properties": {
    "id": {
      "type": "Number",
      "id": 1
    },
    "name": {
      "type": "String",
      "required": false
    }
  }
},
{
  "name": "Order",
  "options": {
    "idInjection": false,
    "foreignKeys": {
      "fk_order_customerId": {
        "name": "fk_order_customerId",
        "entity": "Customer",
        "entityKey": "id",
        "foreignKey": "customerId",
        "onUpdate": "restrict",
        "onDelete": "cascade"
      }
    }
  },
  "properties": {
    "id": {
      "type": "Number"
      "id": 1
    },
    "customerId": {
      "type": "Number"
    },
    "description": {
      "type": "String",
      "required": false
    }
  }
}

boot-script.js

module.exports = function (app) {
  var mysqlDs = app.dataSources.mysqlDS;
  var Book = app.models.Order;
  var Author = app.models.Customer;

  // first autoupdate the `Customer` model to avoid foreign key constraint failure
  mysqlDs.autoupdate('Customer', function (err) {
    if (err) throw err;
    console.log('\nAutoupdated table `Customer`.');

    mysqlDs.autoupdate('Order', function (err) {
      if (err) throw err;
      console.log('\nAutoupdated table `Order`.');
      // at this point the database table `Order` should have one foreign key `customerId` integrated
    });
  });
};

Breaking Changes with GeoPoint since 5.x

Prior to loopback-connector-mysql@5.x, MySQL connector was saving and loading GeoPoint properties from the MySQL database in reverse. MySQL expects values to be POINT(X, Y) or POINT(lng, lat), but the connector was saving them in the opposite order(i.e. POINT(lat,lng)).

Use the geopoint type to achieve so:

  @property({
    type: 'geopoint'
  })
  name: GeoPoint;

If you have an application with a model that has a GeoPoint property using previous versions of this connector, you can migrate your models using the following programmatic approach:

Click here to expand

NOTE Please back up the database tables that have your application data before performing any of the steps.

  1. Create a boot script under server/boot/ directory with the following:
'use strict';
module.exports = function (app) {
  function findAndUpdate() {
    var teashop = app.models.teashop;
    //find all instances of the model we'd like to migrate
    teashop.find({}, function (err, teashops) {
      teashops.forEach(function (teashopInstance) {
        //what we fetch back from the db is wrong, so need to revert it here
        var newLocation = {
          lng: teashopInstance.location.lat,
          lat: teashopInstance.location.lng,
        };
        //only update the GeoPoint property for the model
        teashopInstance.updateAttribute('location', newLocation, function (
          err,
          inst,
        ) {
          if (err) console.log('update attribute failed', err);
          else console.log('updateAttribute successful');
        });
      });
    });
  }

  findAndUpdate();
};
  1. Run the boot script by simply running your application or node .

For the above example, the model definition is as follows:

{
  "name": "teashop",
  "base": "PersistedModel",
  "idInjection": true,
  "options": {
    "validateUpsert": true
  },
  "properties": {
    "name": {
      "type": "string",
      "default": "storename"
    },
    "location": {
      "type": "geopoint"
    }
  },
  "validations": [],
  "relations": {},
  "acls": [],
  "methods": {}
}

Running tests

Own instance

If you have a local or remote MySQL instance and would like to use that to run the test suite, use the following command:

  • Linux
MYSQL_HOST=<HOST> MYSQL_PORT=<PORT> MYSQL_USER=<USER> MYSQL_PASSWORD=<PASSWORD> MYSQL_DATABASE=<DATABASE> CI=true npm test
  • Windows
SET MYSQL_HOST=<HOST> SET MYSQL_PORT=<PORT> SET MYSQL_USER=<USER> SET MYSQL_PASSWORD=<PASSWORD> SET MYSQL_DATABASE=<DATABASE> SET CI=true npm test

Docker

If you do not have a local MySQL instance, you can also run the test suite with very minimal requirements.

  • Assuming you have Docker installed, run the following script which would spawn a MySQL instance on your local:
source setup.sh <HOST> <PORT> <USER> <PASSWORD> <DATABASE>

where <HOST>, <PORT>, <USER>, <PASSWORD> and <DATABASE> are optional parameters. The default values are localhost, 3306, root, pass and testdb respectively.

  • Run the test:
npm test
Tags: connectors